Bill of Materials
This page lists everything you need to build JetBot, along with purchasing links from popular vendors.
Some of the parts are 3D printed. We provide the STL files needed to print these parts. Please see our 3d printing page for tips on printing.
Common parts
You need these components for each JetBot.
Part | Quantity | Cost | URL | Notes |
---|---|---|---|---|
Jetson Nano | 1 | $99.00 | NVIDIA | |
Micro SD card | 1 | $13.99 | Amazon | 64GB |
Power supply | 1 | $7.50 | Adafruit | Micro USB, 5V, 2.5A |
Motor | 2 | $5.90 | Adafruit, Amazon(1), Amazon(2) | "TT" form factor |
Motor Driver | 1 | $19.95 | Adafruit, Amazon | |
Caster ball | 1 | $6.30 | Amazon | 1-inch diameter |
Battery | 1 | $15.99 | Amazon | 2x 5V/3A output, 10,000mAh |
USB cable pack | 1 | $6.99 | Amazon | Type A to Micro, right angle |
PiOLED display | 1 | $14.95 | Adafruit, Amazon | |
PiOLED header | 1 | $5.95 | Adafruit, Amazon, Sparkfun | 2x(3+) right angle male |
Chassis | 1 | -- | STL file | see 3D printing |
Camera Mount | 1 | -- | STL file | see 3D printing |
Camera
You need a camera with appropriate sensor and field of view for each JetBot. Select an option and get the parts specified.
Option 1 (default) - Leopard Imaging Camera
Part | Quantity | Cost | URL | Notes |
---|---|---|---|---|
Camera | 1 | $29.00 | Leopard Imaging | LI-IMX219-MIPI-FF-NANO-H145 |
Option 2 - IMX219-160 Camera
Part | Quantity | Cost | URL | Notes |
---|---|---|---|---|
Camera | 1 | $29.90 | Amazon | IMX219-160 Camera |
Option 3 - RPi Camera V2 + Lens Attachment
Part | Quantity | Cost | URL | Notes |
---|---|---|---|---|
Camera | 1 | $23.90 | Amazon, Adafruit | Raspberry Pi Camera V2 |
Camera lens attachment | 1 | $18.99 | Amazon(1), Amazon(2), eBay | 160-degree FoV |
WiFi
You need a WiFi solution for each JetBot. Select an option and get the parts specified.
Option 1 (default) - M2 Card + Antennas
This option is a good choice if you're building JetBot with the original Jetson Nano 4GB. It has been widely tested and used for JetBot.
Attention
Jetson Nano 2GB does not have a M.2 connector, so this option will not work with it.
Part | Quantity | Cost | URL | Notes |
---|---|---|---|---|
WiFi card | 1 | $18.95 | Amazon, NewEgg | M2, Intel Wireless-AC 8265 |
WiFi antenna | 2 | $5.06 | Arrow | U.FL connectors |
Option 2 - USB Dongle
This option is compatible with both the original Jetson Nano (4GB) and Jetson Nano 2GB.
Part | Quantity | Cost | URL | Notes |
---|---|---|---|---|
WiFi Dongle - TP-Link Archer T2U Nano | 1 | $17.99 | Amazon | RTL8811AU chipset |
WiFi Dongle - TP-Link Archer T2U Plus | 1 | $19.99 | Amazon | RTL8811AU chipset |
Info
For other possible USB Wi-fi dongles that you can use on Jetson Nano, please check the Suported Components List.
Wheels
You need wheels with a "TT" motor shaft connector for each JetBot. Select an option and get the parts specified.
Option 1 - 60mm
Part | Quantity | Cost | URL | Notes |
---|---|---|---|---|
Wheel | 2 | $5.00 | Adafruit | 60mm diameter |
Caster base | 1 | -- | STL file | for 60mm wheel |
Caster shroud | 1 | -- | STL file | for 60mm wheel |
Option 2 - 65mm
Part | Quantity | Cost | URL | Notes |
---|---|---|---|---|
Wheel | 2 | $3.00 | Adafruit | 65mm diameter |
Caster base | 1 | -- | STL file | for 65mm wheel |
Caster shroud | 1 | -- | STL file | for 65mm wheel |
Assembly Hardware
You need the following parts to build JetBot. They come in packs, so order the quantity you need for the number of JetBots you are going to build.
Part | Qty per JetBot | Qty per pack | Cost per JetBot | URL | Notes |
---|---|---|---|---|---|
Adhesive pads | 2 | 48 | $0.14 | Amazon | |
M2 screw | 20 | 100 | $1.29 | Amazon | 8mm long, self tapping |
M3 screw | 4 | 60 | $0.47 | Amazon | 25mm long |
M3 nut | 4 | 100 | $0.24 | Amazon | |
Jumper wires | 4 | 40 | $0.13 | Amazon | Female-female, ~20cm |